How to Make and Use a Survival Fish Spear
Frank SherwoodMaking a survival fish spear is a simple task
providing you make it correct the first time. The same goes with all your other
skills. Do it right the first time and you won't waste valuable time having to
do it over again.
Now for the first step: Cut a straight sapling
about eight feet long and about broom handle thickness. Next, split the heavier
end of the sapling down the center and slide a wedge-shaped piece of wood in the
split to keep the prongs open. To keep the sapling from splitting any farther,
lash the wedge in place with cordage. If you use rawhide or sinew, wrap it on
very tight when wet so if they relax any they won't loosen up all the way. The
length of the prongs should be determined by the size of fish you go after. Six
inch prongs are good for medium-sized fish. Next, carve the prongs down to
sharp, tapered points and then fire-harden the tips and you have a survival fish
spear.
Now, to use the fish spear, grab the top end of
the spear in your right hand (if you're right-handed, left hand if you're a
lefty) and raise it above your head. The left hand loosely holds the shaft. It
is used only as a guide, all the thrust coming from the right hand. The tip is
lowered slowly into the water, cutting down on the refraction, and is slowly
moved to within inches of the fish's back. Keep the prongs perpendicular to the
fish so if you miss with one prong the other will hit. Like the heron, the final
thrust is one quick, jab with the right hand pinning the fish and keeping it
pinned to the bottom. Now reach down and pick it up.
Previous
Contents Next
|
